How To Fiberglass A Boat Floor

Painting the fiberglass on your boat hull tin can be a great way to meliorate its advent and brand it wait brand new. But if your boat deck leaves a lot to be desired, that work tin be for zip. That's why Boat Life has put together this brief guide on how to paint a fiberglass boat deck. Use these simple steps to assistance ensure your gunkhole looks equally all-time as information technology can while still maintaining the quality of its fiberglass.

Footstep One: Clean, Rinse, Dry

This might not exist the most fun step in the process, simply if you want the entire process to become smoothly and easily, information technology's essential. Clean off the gunkhole deck with fresh water, and move the boat somewhere condom where it will take the opportunity to rinse, drain, so dry without added debris falling on it. Yous'll want to be somewhere well-ventilated to allow for a proper drying process. Commencement this footstep much before than you might imagine so y'all're sure you're working with a dry out deck.

You may also have to remove many features off the top of your boat that might otherwise make painting labor-intensive. For that reason, don't commit to painting until you're sure you can devote adequate time to the total process.

Step Two: Mask Off the Painting Surface area

Apply specially-designed painter'south tape to the deck and make sure information technology adheres. When learning how to paint a fiberglass boat deck, information technology's important to remember that fiberglass tin be famously slippery, peculiarly when information technology's wet. That's why information technology'south and so important to adequately dry the entire deck.

Take your time hither. If you want precisely painted corners and edges, that happens through masking off these edges. Remember of this equally the first step in a professional-quality coat of paint.

Step Three: Apply the Paint

Although there may be added steps if your fiberglass has a thick layer of gelcoat—and y'all can cheque out our postal service on preparing a fiberglass gunkhole for painting—painting the boat deck is mostly
simpler. One time the expanse is dry, masked off and clear of a gelcoat, you'll be able to apply paint directly.

You can besides apply primer first, though that tin depend on the individual type of paint you're using. If you're non certain what you're using, speak with an expert and allow them know which surface you're going to exist painting to ensure that your pigment matches with the job.

Step Four: Remove the Record and Await

One time the paint is evenly applied, y'all'll exist able to remove the tape and accept a await at what you've done. But y'all're not technically washed all the same—not until you're sure that the paint has adequately stale! Exist sure that you don't need to apply your boat for a few days to ensure that your paint is where it needs to exist before you utilise the boat deck again. Then re-attach any furnishings you removed and get gear up to enjoy the boat again!

Go on Your Boat Looking Great

Desire to make sure your boat deck's fresh expect will final? And then browse our boat waxes and polishes to ensure that your paint is adequately protected from UV and debris damage.